Madden Steel Inc.

Features include:

  • Pre-trommel nugget trap
  • Variable speed control on trommel and feeder
  • Radio controlled grizzly dump
  • Variable speed control on trommel and feeder
  • Electrical starters
  • Urethane screens
  • Extremely high horse power ratio
  • Bolt-in hardened wear plates with hardened counter sunk bolts


S7 or S8 Gold Trommel

Our 300 tons per hour rated S8 gold trommel and 200 tons per hour rated S7 gold trommel have a full power four point drive system, which eliminates the chain drive, and has a full variable speed control. It has an extra heavy shell and is completely lined with abrasion resistant plate in all wear areas. It also features additional reinforcement in drive locations, incorporates oversized shafts, and incorporates oversized bearings.

Testing showed that some of the biggest complaints with trommels is screen blockage, so we have taken and installed full urethane tapered relief octagon screening media to help eliminate this issue, an expensive but needed adaptation. Another advantage with this screen media is it has 10 to 15 times the life of steel. Additionally, the screen media snaps into place, which takes only minutes instead of days, or even weeks, as with other systems.

S8 Gold Trommel Wash Plant

Up to 300 tons per hour, high horsepower, and high recovery rates.

Average typical sluice setup recommended is four 30-inch wide by 30 foot long setup. MSI will calculate this for you to best fit your mine site.

Water pumps, generators, jigs, and sluice boxes available upon request at an additional cost.

  • Centralized lubrication points
  • Oversized bearings and shafts
  • Four point variable speed trommel drive
  • High tech recovery features
  • High tensile frames
  • Time saving, easy, and fast setup and assembly
  • Designed to accommodate a wide variety of sluice boxes or jigs
  • Water manifold with adjustable brass spray nozzles

Power requirement is 240 kilowatts. Water requirement is 1,100 to 2,900 gallons per minute.