Madden Steel Inc.

Average typical sluice setup recommended is two 40-inch wide by 30 foot long setup. MSI will calculate this for you to best fit your mine site.

SV6 Vibratory Gold Wash Plant

Up to 180 tons per hour, quick to setup, and high recovery rates.

Power requirement is 30 kilowatts. Water requirement is 1,100 to 2,000 gallons per minute.

Water pumps, generators, jigs, and sluice boxes available upon request at an additional cost.

  • Oversized bearings and shafts
  • Water manifold and spray bars with independent valves
  • Brass spray nozzles
  • High tech recovery features
  • High tensile structure and frames
  • Designed to accommodate a wide variety of sluice boxes or jigs
  • Designed for nugget trap
  • Time saving, easy, and fast setup and assembly

SV6 Gold Wash Plant

The SV6 Gold wash plant is a ideal machine where your raw materials are more of a sandy and gravely type material and not sticky or clay bound. This design allows for nugget and fine gold recovery. The SV6's horizontal design allows for much lower feed height and improved cleaning action of materials. It accepts up to 8-inch material and incorporates two decks for thinning and separation. It has independent spray bars with heavy duty, changeable, brass spray nozzles. All wear areas have replaceable bolt-in wear plates, oversized shafts, oversized, and a high tensile frame.

Features include:

  • Pre-wetting feed hopper
  • Pre-screen distribution area
  • Under screen material splitters
  • Sluice splitters
  • Electrical starters
  • Screens
  • Extremely high horse power ratio
  • Bolt-in hardened wear plates with hardened counter sunk bolts
  • Centralized lubrication points