Average typical sluice setup recommended is one 30-inch wide by 30 foot long setup. MSI will calculate this for you to best fit your mine site.

  • Oversized bearings and shafts
  • Water manifold and spray bars with independent valves
  • Brass spray nozzles
  • High tech recovery features
  • High tensile structure and frames
  • Designed to accommodate a wide variety of sluice boxes or jigs
  • Designed for additional secondary nugget trap
  • Time saving, easy, and fast setup and assembly

TV2 Gold Wash Plant

The TV2 is an ideal lower capacity or testing or gold prospecting machine and up to 40 tons per hour where your raw materials are more of a sandy and gravely type material and not very sticky or clay bound. This design allows for nugget and fine gold recovery. The TV2's horizontal design allows for much lower feed height and improved cleaning action of materials. It accepts up to 8-inch material and incorporates two decks for thinning and separation. It has independent spray bars with heavy duty, changeable, brass spray nozzles. All wear areas have replaceable bolt-in wear plates, oversized shafts, oversized bearings, and a high tensile frame.

Water pumps, generators, jigs, and sluice boxes available upon request at an additional cost.

Madden Steel Inc.

Power requirement is 30 kilowatts. Water requirement is 800 to 900 gallons per minute.

Features include:

  • Pre-grizzly feeder with radio controlled grizzly dump
  • Under-screen material splitters
  • Sluice splitters
  • Electrical starters
  • Screens
  • Pre-screen nugget trap
  • Extremely high horse power ratio
  • Bolt-in hardened wear plates with hardened counter sunk bolts
  • Centralized lubrication points

TV2 Portable Vibratory Gold Wash Plant

Up to 40 tons per hour, ultra-portable, quick to setup, and high recovery rates.